YASKAWA SI-S3/V Series Installation Manual page 22

5 Installation Procedure
4. Reattach the bottom cover.
5. Connect the CANopen Option to the drive. Properly secure the tabs on the left and right
sides of the CANopen Option to the drive case.
Figure 12
6. Connect the ground wire from the drive ground terminal to the CANopen Option ground.
When wiring the CANopen Option, pass the ground wire through the inside of the drive
bottom cover, then pass the ground wire into the through-hole at the front of the CANopen
Option.
Figure 13
through-hole
for ground wire
7. Connect the communications cable to the terminal block.
22
tabs should line up
Figure 12 Attach CANopen Option
ground wire
ground
wire
Figure 13 Ground Wire Connection
YASKAWA ELECTRIC TOBP C730600 24D 1000-Series Option SI-S3/V, SI-S3/T Installation Manual
tabs should line up
drive ground
terminal
Pass the ground
wire through
the bottom cover
of the drive.