Features - ST STM32H5 Nucleo-144 User Manual

1

Features

• NUCLEO-H563ZI
memory and 640 Kbytes of SRAM in an LQFP144 package
• Ethernet compliant with IEEE-802.3-2002
• USB Type-C
• Three user LEDs
• Reset and user push-buttons
• 32.768 kHz LSE crystal oscillator
• Board connectors:
– USB Type-C
– ST Zio connector including ARDUINO
– ST morpho extension pin headers for full access to all STM32 I/Os
• Flexible power-supply options: ST-LINK USB V
• On-board STLINK-V3EC debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM3115 - Rev 1
microcontroller based on the Arm
®
(sink only)
®
®
, MDK-ARM, and STM32CubeIDE
® ®
Cortex -M33 core, featuring 2 Mbytes of flash
®
Uno V3 expansion connector
, USB connector, or external sources
BUS
STM32CubeH5
UM3115
Features
MCU Package
page 2/43