7 .20 Real-Time Backup; Points To Be Confirmed Before Use; Media-Related Matters - Konica Minolta CS-7 Operation Manual

7 .20 Real-time backup

Using the real-time backup function, you can output
the exposed images to media at the same time as the
study ends .
HINT •••••••••••••••••••••••••••••• •••••••
• For details on editing the tag of image data to be
output, refer to "Editing Media Output Tag" in "CS-7
Installation/Service Manual" .
• •• • • •• • • •• • •••••••••••••••••••••••••••••••••••••••••
7 .20 .1 Points to be confirmed
before use
IMPORTANT •••••••••••••••••••••••••••••• •••••••
• Before connecting the media used to this device, run a
virus scan to check it for virus infections .
• Do not connect any media for any other reasons other
than to carry out real-time backups . If you connect
other media, the backup drive will be changed and
normal output will be disabled .
• Do not remove the media while the access lamp to the
media is on . Otherwise, data may be lost .
• •• • • •• • • •• • •••••••••••••••••••••••••••••••••••••••••
7 .20 .2

Media-related matters

IMPORTANT •••••••••••••••••••••••••••••• •••••••
• A USB memory, SD card and DVD-RAM can be used
as the backup media . However, two or more media
cannot be used simultaneously .
• Check beforehand that the PDI files being output to
media can be retrieved using another company's sys-
tems .
• Access to some types of media via the encryption
function is denied if you do not enter the correct pass-
word the predetermined number of times . For optimal
results, read the operation manuals carefully before
using the media .
• The following lists recommended media . For purchase
information, contact Konica Minolta technical repre-
sentatives .
Types of media
USB memory
SD card
DVD-RAM drive
DVD-RAM media
• When using the DVD-RAM, format it beforehand ac-
cording to the below .
– File system: UDF 2.01 (default)
– Allocation unit size: 2048 bytes
• When the "Burn a Disc" dialog box is displayed when
you use the DVD-RAM, select "Use as the USB flash
drive" .
• For details of the DVD-RAM and other media, refer to
their respective operation manuals . If you do not fol-
low the relevant operating procedure(s) described in
the manual, your data may not be backed up correctly .
• If you do not correctly write data to the DVD-RAM, it
may result in a read error . In this case, redo the output
to media process from the start .
• Depending on the media used, access to the task tray
may be required in order to start the tool . If you want
to display the task tray on this device, contact Konica
Minolta technical representatives .
•••••••••••••••••••••••••••••••••••••••••••••••••• •• •
HINT
• The following shows the capacity per image when out-
putting images in PDI format .
DR Detector
AeroDR3 1417HD
AeroDR 1417HQ
AeroDR 2 1417HQ
AeroDR 2 1417S
AeroDR 1717HQ
*The capacity varies depending on the image trimmed .
•••••••••••••••••••••••••••••••••••••••••••••••••• •• •
340
Product name
JetFlash® 780 from Transcend
Information, Inc .
PSDHC/10 series from Princeton
Technology, Ltd .
BRP-U6N series from I-O Data
Device, Inc .
DRM47PWC .S1P5S A from Hita-
chi Maxell, Ltd.
•••••••••••••••••••••••••••••••••• • ••
Capacity
• For "Standard" (200μm)
Approximately 40MB
(Approximately 8MB more for
every additional image)
• For "High" (87.5μm)
Approximately 65MB
(Approximately 30MB more
for every additional image)
Approximately 42MB
(Approximately 10MB more for
every additional image)
Approximately 44MB
(Approximately 12MB more for
every additional image)