Initializing The Balance - AND GR Series Instruction Manual

Initializing the Balance

8.2.
This function returns the following parameters to factory settings.
Calibration data.
Function table.
The 100% weight
The data that is stored in the balance using data memory function.
External calibration weight and target weight.
Switch settings for "Permission or prohibition".
Operation
Step 1 Turn off the display.
Step 2 Press the ON:OFF key while the RANGE key and PRINT
key are pressed and held. Then the balance display p5 .
Step 3 Press the RANGE key to display Clr .
Step 4 Press the PRINT key. (If you want to cancel this operation,
press the CAL key)
Step 5 Press the RE-ZERO key.
Step 6 Press the PRINT key to initialize the balance. The balance
will automatically return to weighing mode.
23
Press and hold Press