Commands; Command List - AND GR Series Instruction Manual

16. Commands

Command List

16.1.
Commands to request weighing data
C
Q
S
SI
SIR
Commands to control the balance
CAL
MCL
MD:nnn
OFF
ON
P
PRT
R
RNG
TST
U
Commands to request stored data
?MA
?MQnnn
?MX
Cancel command for the SIR command.
Query command for weighing data.
Request command for stable weighing data.
Query command for weighing data.
Request command for continuous weighing data.
Calibration command.
Command to delete all stored data.
Command to delete data of data number nnn.
Display OFF command.
Display ON command.
Same as the ON:OFF key, Display ON/OFF command.
Same as the PRINT key.
Same as the RE-ZERO key, RE-ZERO command.
Same as the RANGE key, Range command.
Calibration test command.
Same as the MODE key, Unit command.
Output command to transmit all memory data.
Request command to transmit data of data number nnn.
Query command for last data number.
nnn
: numerical value of three figures
52