Explanation Of Item "Data Format - AND GR Series Instruction Manual

Explanation of Item "Data format"

9.5.
A&D standard format
This format is used when the peripheral equipment is capable of receiving A&D format. If an AD-8121
is used, set the printer to mode 1 or 2.
This format consists of fifteen characters (excluding the terminator).
A header of two characters indicates the status of the stability.
The plus sign is placed before the data, when the data is zero or positive.
The weight data uses leading zeros.
The unit has three characters.
S T , + 0 0 0 . 1 2 7 8
Header
S T Stable header
U S Unstable header
O L
Overload header
D.P. (Dump print) format
This format is used when the peripheral equipment can not process the A&D format. If an AD-8121 is
used, set the printer to mode 3.
This format consists of sixteen characters (excluding the terminator).
A header of two characters indicates the status of the stability without overload.
The polarity sign is placed before data, if not zero or overloaded.
The weight data has spaces in place of the leading zeros.
The unit has three characters.
W T T
Header
Stable header
W T
Unstable header
U S
KF format
This is the Karl-Fischer moisture meter format, and is used when the peripheral equipment can only
communicate using this format.
This format consists of fourteen characters (excluding the terminator).
This format has no header characters.
The polarity sign is first, if not zero or overloaded.
The weight data uses spaces in place of leading zeros.
This format outputs the unit "g" only for a stable value.
0 . 1 2 7 8
+
Data
Data
Q T
+ 0 . 1 2 7 8
Data
Q T
g
Unit
g
g C R L F
Unit Terminator
Stable header for counting mode
C R L F
g
Unit Terminator
Stable header for counting mode
C R L F
Terminator
Stable value
Unstable value
29
5if type 0
5if type 1
5if type 2