Function Table; Display And Keys Of The Function Table - AND GR Series Instruction Manual

9. Function Table

The operation of the "Function Table" is to read or rewrite the parameters that are stored in the balance.
These parameters are stored until the next change, even if the AC adapter is removed.
The function table menu consists of two layers. The first layer is the "Class" and second layer is the
"Item". Each Item stores a parameter. The effective parameter is the last parameter that is displayed in
the sequence. New parameters operate upon the balance after pressing the PRINT key.
Structure and Sequence of the Function Table
Start, From weighing
Class
End,
Caution
The balance may not work effectively when a combination of parameters and environment are not
proper. Confirm the parameter before changing it.
Control of this Function Table
The function table is controlled by a parameter in "Permission or prohibition". Refer to section "8.
Function Switch and Initialization".

Display and Keys of the Function Table

9.1.
The " " symbol is displayed at a selected parameter.
When the key is pressed and held in weighing mode, the balance enters the "function
table mode". The key to change the class or item in the function table mode.
The key to select the parameter, when the balance displays an item.
The key to move to an item from the class, when the balance displays a class. The key
to store new parameters and display the next class, when the balance displays an item.
The key to cancel new parameters and display the next class, when the balance displays
an item. The key to exit the function table mode, when the balance displays a class.
Press and hold
To weighing
This example sets "use" to "Data memory" and
"every minute" to "Interval time".
Press several times
Item
24
Item
"Data memory"
Parameter
"Use"
Parameter
"Every minute"
Press several times
Item
"Interval time"