Introduction; Features; Compliance With Fcc Rules - AND GR Series Instruction Manual

1. Introduction

THANK YOU FOR YOUR A&D PURCHASE
This manual will tell you in simple language how this balance works and how to get the most out of it in
terms of performance.

Features

1.1.
Built-in Calibration Weight (internal weight), used to calibrate and verify the calibration of your
balance.
Automatic Self Calibration, using the built-in weight, adapting to changes in temperature.
Automatic Response Adjustment, adapting to vibration and drafts in the environment.
Data Memory Function, storing 200 weighing data.
Interval Memory Mode, storing weighing data periodically.
Good Laboratory Practices (GLP) data output using a serial interface.
Under Hook, for measuring specific gravity and magnetic substances.
The balance is equipped with the specific gravity measuring mode to calculate the specific gravity
(density) of a solid.
Multiple Weighing Units, with most of the common units used around the world.
RS-232C serial interface, for transmitting data and controlling your balance.
Windows communication tools software (WinCT) to allow easy communication with a computer
using Windows. The current version of the WinCT can be downloaded from the A&D website.
Door Control Lever, a front mounted door control can easily open and close one of the side doors
if connected using the door joint.

Compliance with FCC Rules

1.2.
Please note that this equipment generates, uses and can radiate radio frequency energy. This
equipment has been tested and has been found to comply with the limits of a Class A computing device
pursuant to Subpart J of Part 15 of FCC rules. These rules are designed to provide reasonable
protection against interference when equipment is operated in a commercial environment. If this unit is
operated in a residential area it might cause some interference and under these circumstances the user
would be required to take, at his own expense, whatever measures are necessary to eliminate the
interference.
(FCC = Federal Communications Commission in the U.S.A.)
5