Initializing Function Settings - AND HV-CWP Series Instruction Manual

Class
Items
Time and date
adding
5td1
(CH1)
ID number adding
5id1
(CH1)
GMP output
inf1
(CH1)
Time and date
adding
5td2
ID number
adding
5id2
GMP output
inf2
■ factory settings
ESC T, ESC D： The time and date uses the calendar function of the AD-8121B and AD-8127.
Use the "dump print mode" of the AD-8121B and AD-8127.

13.3. Initializing Function Settings

The function settings can be returned to factory settings by performing the following steps:
Step 1 Press the ON/OFF key to turn off the display.
Step 2 While pressing the TARE key, press and hold the ON/OFF key until
release the keys.
Step 3 Press the SET key to display
Step 4 Press the ENTER key while
Function settings are returned to factory settings. The scale returns to the weighing mode after
displaying
* This procedure also initializes each comparison value for the comparator.
Parameter
0
Do not output the date and time
■
1 Outputs time (ESC T)
2
Outputs date (ESC D)
3
Outputs the date and time (ESC D,ESC T)
Unused
4
Unused
5
Unused
6
0 Do not output the ID
■
1
Outputs the ID
0
Do not output
■
1
Outputs (ESC D, ESC T output)
2
Outputs (DATE,TIME output)
3
Unused
-
Unused
Unused
-
-
Unused
Clrfgo .
Clrfgo
end .
Details and usage
is displayed.
36
Clrfno appears, then