Installing Your Balance; Display Symbols And Key Operation - AND GR Series Instruction Manual

Installing Your Balance

3.1.
Step 1 Consider the section "2. Caution" for installing your balance.
Step 2 Assemble the "Dust Plate", "Breeze Break Ring / Fine Range Breeze Break Ring" and "Weighing Pan" on
your balance. There is a reference illustration on the previous page.
Step 3 Adjust the level of the balance using the leveling feet.
Step 4 Connect the AC adapter to the balance. Warm up the balance for at least one hour with nothing on the
weighing pan.

Display Symbols and Key Operation

3.2.
The amount of stored data
with memory data function
Processing indicator
Stabilization indicator
Stand-by indicator
Displayed data number
Automatic self
calibration notice
There are two types of key operations: "press and release" and
"press and hold". The function of each key changes depending
on how the key is pressed. Do not press and hold a key unless
necessary.
Key
Display ON / OFF key. The stand-by indicator is displayed, when the balance is turned off
with this key. Weighing data is displayed, when the balance is turned on with this key.
Readability of weighing data is
changed.
Units are changed (selected from the
function table). Refer to section "4.
Weighing Units".
This key performs calibration of the
balance using the internal weight.
Weighing data is stored in the balance
(Factory setting) or is output to the RS-
232C
according to the function table.
The key sets the display to zero. This key returns a weighing value to the center of zero
when the weighing pan is empty, and can also tare (cancel) the weight of container and/or
sample. Please use this key before each weighing to cancel possible error.
Press (press and release) the key
interface. This
Response indicator
Blinking indicators
The function table menu is displayed. Refer to
section "9. Function Table".
Response adjustment is performed.
Other items of the calibration menu are
displayed.
Data memory menu or GLP menu is
displayed. This key functions according to
key functions the function table. Factory setting is "not
used".
10
Weighing data or
stored data
Stand-by indicator of
interval memory function
Active indicator of interval
memory function
Press
(Press and release)
Press and hold the key
Press and
hold