Nortel HMS400 Installation And Configuration Manual page 94

April 2006
Note: The HMS400 must be stopped before the package change can be carried out.
This utility will only allow selection of the remaining option depending on the package that had
already been installed.
To upgrade, just select the Full Version and click on Save.
The utility will then detect whether HMS is still running or not at this point. If it is then it will prompt a
warning message requesting that the system be stopped before it can proceed and thereafter
exiting the UI altogether. This means that the user will have to click on the Package Upgrade
option again after shutting down the HMS400.
Once the package change has been executed another message will be shown to indicate that the
process is completed.
Restart the HMS400 after clicking OK.
Nortel Hospitality Messaging Server 400 -94-
Installation and Configuration Guide