Nortel HMS400 Installation And Configuration Manual page 74

1. Click on the channel to be configured. Selected line will be highlighted in "blue".
2. To set multiple lines of the same configuration, select the 1
Shift Key, and then select the last line. All selected lines will now be highlighted.
3. Enter the Extension number to be assigned to the channel.
4. Select a description for the channel
5. Select language – a call landing on this line will have its prompts played in this language.
Note: For non-English guest mailboxes, the caller will hear instructions to leave a message in
two languages – first in the Line language then in the guest's mailbox language. This is the
default Dual-Language prompting feature
6. Set line as Incoming or Incoming/Outgoing
Note: The Incoming/Outgoing line is used for making Auto-Wakeup calls but it also has all the
functionalities of an Incoming line.
Note2: All unused channels MUST be set to Incoming
7. Click Update to make the change
8. Click Save
9. Click Next upon completion to go to the following screen
10. A message box will be shown requesting for a system shutdown in order for the changes to
take effect
Nortel Hospitality Messaging Server 400
Installation and Configuration Guide
st
line, press and hold down the
April 2006
-74-