Configuring Entry Point - Nortel HMS400 Installation And Configuration Manual

2. Enter the key code in the given field.
3. Click Verify.
4. Upon verification, the Results box will show the status, number of channels enabled and the
availability of the Minibar module.
5. If the Key Code is invalid, the system will not be allowed to start up.

Configuring Entry Point

An entry point is information that the system needs to determine how a call is handled, who the
caller is, and who the call was meant for. It is typically made up of a string of digits separated by an
underscore (_). The digits preceding the '_' form the Called Party ID while the digits following it
form the Calling Party ID. The PBX sends this information on each call, without which the system
would be forced to run a default call flow that only allows callers to access their own mailbox.
Nortel Hospitality Messaging Server 400
Installation and Configuration Guide
April 2006
-70-