Nortel HMS400 Installation And Configuration Manual page 92

The table below explains each of the parameters in detail:
Field
Port Settings
Maximum Retry
Time-Out (in seconds)
Extension Position
Extension Length
AWU Extension Position
AWU Extension Length
Guest Name Length
Default Check In/Admin MBOX Language
Language Settings
Nortel Hospitality Messaging Server 400
Installation and Configuration Guide
Description
PMS CONFIGURATION
Serial Port settings viz. Com Port, Baud
Rate, Parity, Data Bit, and Stop Bit
Maximum number of times a packet is
resent after each time-out before packet
is discarded
Sets the duration for a time-out to occur
Determines the exact position of the
extension field in a PMS record
Sets the maximum length of the
extension field as supported by the PMS
Determines the exact position of the
extension field in a PMS AWU record
Sets the maximum length of the
extension field as supported by the PMS
Specifies the maximum name length
supported by the PBX
Sets the default language for guests if it
is not specified by the Hotel PMS. All
system prompts will be played in this
language.
mailboxes that have been re-enabled
through TUI
Specifies number of languages to
April 2006
Also used for Admin
-92-