Required Equipment; Connecting Peripherals To The Server - Nortel HMS400 Installation And Configuration Manual

Required equipment

To install the modem, you need the following equipment:
1. an analog external modem that includes
a. an RJ-11 analog phone cord
b. US Robotics 56 Kbps USB modem Nortel order code NTUB30HA for North
America only. Other regions must source for an equivalent USB modem.
2. an analog line jack

Connecting peripherals to the server

This section describes how to connect the monitor, keyboard, mouse, and modem to the server.
Rear panel
The peripheral device connection panel at the back of the server provides a legend that shows the
symbol for each peripheral device and which connector to use
The diagram below shows the connectors for the power cord and the peripheral devices on the
HMS 400 server.
Nortel Hospitality Messaging Server 400
Installation and Configuration Guide
CAUTION
Risk of system failure
You can install or use only Nortel Networks-approved
peripheral devices on your server. Installation or use of
unapproved peripheral devices can result in system
failure.
.
April 2006
-54-