Option 001
Option 908
Option 910
Option 913
Options
Option 001 adds IF switching capability to allow up to four test sets to be
connected to the 8510 at the same time. The test set in use is selected from
the 8510 network analyzer. The 20 MHz IF signal is transmitted from the
standard test set through the option 001 test set(s) to the 8510.
IF switching is performed automatically by the option 001 test set(s),
without reconnections. For more information, refer to
Test Sets" on page
4-6.
Option 908 supplies the parts required to rack mount the test set with
handles removed. Refer to
information.
Option 910 provides a duplicate manual at the time of purchase.
Option 913 supplies the parts required to rack mount the test set with
handles attached. Refer to
information.
Chapter 3, "Installation"
Chapter 3, "Installation"
Agilent 8511B Test Set Operating and Service Manual 1-9
General Information
Options
"Controlling Multiple
for additional
for additional