8
Introduction
Replaceable Parts List
Reference
Designations
Ordering Information
Replaceable Parts
This chapter contains information for ordering parts. The
List"
section describes how to order assemblies which are available on an
exchange basis.
Each part is listed both in the figures and the tables by reference designators.
Quantity refers to the total number of the part in the instrument. The
description is a brief written description of the part and may be used for
ordering purposes.
•
A = assembly
•
B = fan
•
C = capacitor
•
W = cable, wire
•
T = transformer
To order a listed part, quote the Agilent part number, quantity required, and
send the order to the nearest Agilent office.
To order a part that is not listed, include the instrument model number,
complete serial number, description and function of the part, and quantity
required. Send the order to the nearest Agilent office.
Agilent 8511B Test Set Operating and Service Manual 8-1
Replaceable Parts
"Replaceable Parts