Options; Hardware; Support - Agilent Technologies 53150A Service Manual

NOTE
In This Guide

Options

The options available for the Agilent 53150A/151A/152A are listed
following this paragraph. Specifications for the options are listed in
Chapter 6, "Specifications." Options ordered with the Counter are
installed at the factory and are ready for operation on delivery.

Hardware

• High Stability Oven Timebase, Option 001
• Battery/DC Power Input, Option 002
• Rack Mount Kit, Option 1CM (not installed)
• Soft Carrying Case, Option 007 (not installed)
Hardware options can be retrofitted at an Agilent Service Center.
However, the cost to retrofit options is considerably higher than the cost of
the same options when purchased with the instrument.

Support

• 3-year Return to Agilent for Repair, Option W30
• 3-year Return to Agilent for Calibration, Option W32
• 3-year Return to Agilent for Standards Compliant Calibration,
Option W34
• 5-year Return to Agilent for Repair, Option W50
• 5-year Return to Agilent for Calibration, Option W52
• 5-year Return to Agilent for Standards Compliant Calibration,
Option W54
Assembly Level Service Guide xi