Warranty; Certification - Agilent Technologies 8511B Operating And Service Manual

Certification

Warranty

Warranty
Agilent Technologies certifies that this product met its published
specifications at the time of shipment from the factory. Agilent further
certifies that its calibration measurements are traceable to the United States
National Institute of Standards and Technology (NIST, formerly NBS), to the
extent allowed by the Institute's calibration facility, and to the calibration
facilities of other International Standards Organization members.
This Agilent system product is warranted against defects in materials and
workmanship for a period corresponding to the individual warranty periods
of its component products. Instruments are warranted for a period of one
year. During the warranty period, Agilent will, at its option, either repair or
replace products that prove to be defective.
Warranty service for products installed by Agilent and certain other products
designated by Agilent will be performed at Buyer's facility at no charge
within Agilent service travel areas. Outside Agilent service travel areas,
warranty service will be performed at Buyer's facility only upon Agilent's
prior agreement and Buyer shall pay Agilent's round trip travel expenses. In
all other areas, products must be returned to a service facility designated by
Agilent.
For products returned to Agilent for warranty service, Buyer shall prepay
shipping charges to Agilent and Agilent shall pay shipping charges to return
the product to Buyer. However, Buyer shall pay all shipping charges, duties,
and taxes for products returned to Agilent from another country.
Agilent warrants that its software and firmware designated by Agilent for
use with an instrument will execute its programming instructions when
properly installed on that instrument. Agilent does not warrant that the
operation of the instrument, or software, or firmware will be uninterrupted or
error free.
LIMITATION OF WARRANTY. The foregoing warranty shall not apply
to defects resulting from improper or inadequate maintenance by Buyer,
Buyer-supplied software or interfacing, unauthorized modification or
misuse, operation outside of the environmental specifications for the
product, or improper site preparation or maintenance.
NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. AGILENT
SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OR
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
iv Agilent 8511B Test Set Operating and Service Manual