Verifying The Agilent 8511B - Agilent Technologies 8511B Operating And Service Manual

Verifying the Agilent 8511B

The Agilent 8511B has been designed to operate specifically with the 8510
network analyzer.
•
To install the instrument, turn to
•
To verify that the instrument meets its published specifications, use the
Agilent 8511A,B and Antenna Measurement System Performance
Verification Software (part number 08511-60024).
•
To troubleshoot the test set, refer to the troubleshooting information in
the Agilent 8510 On-Site Service Manual. This will determine if the test
set is at fault. Then refer to
more information.
Chapter 3, "Installation".
Chapter 6, "Test Set Troubleshooting"
Agilent 8511B Test Set Operating and Service Manual 1-3
General Information
Verifying the Agilent 8511B
for