Table of Contents
Advertisement
Related information
Autofilling options
About this topic
Pump Module User Guide
Item Feature
Description
5
SHELF B
Connects the communication cable from a second Weigh
port
Shelf, Weigh Station, or Weigh Pad.
IMPORTANT
Module for each pairing of reservoir and Weigh Shelf,
Weigh Station, or Weigh Pad.
6
COM IN
Connects the communication cable from a Pump Module
port
to the controlling liquid- handling device to enable
communication.
7
COM OUT
Connects the communication cable from one Pump Module
port
to another Pump Module in a series. Up to five Pump
Modules and three Weigh Stations can be connected and
controlled through one liquid- handling device. For details,
see
8
Port
Not used
IMPORTANT
The ports described in items 4- 7 are not Ethernet ports.
For information about...
Pump Module specifications
Pump Module maintenance
This topic describes the following reservoirs and wash stations that can be
automatically filled and emptied using the Pump Module:
•
Agilent Auto Filling Reservoir
•
Agilent Tip Wash Station (formerly known as the MicroWash Reservoir)
•
Agilent 8- Channel Wash Station
•
Agilent Open Wash Reservoir
Agilent reservoirs are approved for use with most reagents and solvents. If you
have questions on the use of a particular chemical or solvent, contact
Automation Solutions Technical Support before use.
Agilent Technologies recommends one Pump
"Connecting power and communication" on page
See...
"Laboratory setup requirements" on
page 6
"Maintenance and troubleshooting" on
page 27
Pump Module User Guide
Autofilling options
15.
9
Advertisement
Table of Contents
