Installing The Test Set On A Bench - Agilent Technologies 8511B Operating And Service Manual

Installation

Installing the Test Set on a Bench

Installing the Test Set on a Bench
When installing the test set for use on a bench, place it on a grounded
anti-static work surface to lessen the chance of ESD damage. The antistatic
surface should extend far enough in front of the test set to provide effective
protection for the test ports and cable ends. Refer to "Operating and Safety
Precautions" on page 1-12. A grounding receptacle is provided on the test
set as an alternate grounding point for your anti-static wrist-strap.
Agilent 8511B Test Set Operating and Service Manual 3-5