Exchange Assemblies Available - Agilent Technologies 8511B Operating And Service Manual

Exchange Assemblies
Available
Replaceable Parts
The assemblies below are replaceable on a rebuilt exchange basis at a cost
saving. They are not field-repairable. Defective assemblies must be returned
for credit to realize the cost savings. Thus, assemblies required for spare
parts stock should be ordered by the new assembly part number which is
included in the replaceable parts list of this section. See the parts list
for the orderable part numbers, and
Rebuilt-Exchange flow-chart.
•
A2 = IF multiplexer board assembly (option 001 only)
•
A3 = VTO summing amplifier board assembly
•
A4 = GPIB board assembly
•
A10, A11, A12, A13 plus A14 = sampler assembly
(inputs bl, b2, a1, a2 and A14 VTO driver)
•
A15 = regulator board assembly
8-2 Agilent 8511B Test Set Operating and Service Manual
Figure 8-1 on page 8-3 for the