Chapter 9 Maintaining The Bios And System Board Firmware; Configuring The 600R Bios And Firmware; Nortel Callpilot; 600R Server Maintenance And Diagnostics - Nortel CallPilot User Manual

Chapter 9
Maintaining the BIOS and system board
firmware
In this chapter
"Configuring the 600r BIOS and firmware" (page 97)
"600r server display non-default CMOS settings" (page 100)
"Using the System Setup Utility logs" (page 101)
"Maintaining the onboard video and network interface" (page 103)
Configuring the 600r BIOS and firmware
Overview
The Basic Input/Output System (BIOS) of your 600r server is Flash
ROM-based code. Upgrade or reconfigure the BIOS using the utilities on
the CallPilot Image DVD. The utility programs write updated code to the
Flash ROM chips.
Upgrading or reconfiguring the BIOS is a three-step process:
1. Boot up from the Image DVD and display the Image Menu.
2. Update the BIOS firmware.
3. Update the FRU/SDR firmware.
You must complete all the steps, in the correct order, for your system to function
properly.
Copyright © 2007, Nortel Networks
.
ATTENTION

Nortel CallPilot

600r Server Maintenance and Diagnostics

NN44200-703 01.04 Standard
5.0 25 April 2007
97