Replacing memory DIMMs
There are two Dual Inline Memory Modules (DIMMs) installed on your
server. You must replace the memory DIMMs with those in the Nortel
replacement pack. Nortel does not support more than two DIMM modules
in the 600r server.
To replace the DIMM cards
Step
1
2
3
4
Copyright © 2007, Nortel Networks
.
CAUTION
Risk of equipment damage
Take precautions to protect internal components. Electrostatic
discharge (ESD) can damage cards and make them unusable.
Action
Power down the server, unplug all peripheral devices and Ethernet
cables, and disconnect the AC power.
Attach the ESD strap to your wrist and attach the other end to a
known grounded connection.
Remove the server cover. For instructions, see
replacing the server cover" (page
Locate memory banks 1A AND 1B on the server board. For details,
see
Figure 27 "Memory DIMM locations" (page
Figure 27
Memory DIMM locations
Nortel CallPilot
600r Server Maintenance and Diagnostics
NN44200-703 01.04 Standard
5.0 25 April 2007
Replacing memory DIMMs 91
"Removing and
77).
91).