To upgrade or configure the BIOS
Step
1
2
3
4
5
6
7
Copyright © 2007, Nortel Networks
.
5.
Reboot
6.
Goto DOS
Action
Enter 1 to run the 600r server BIOS update from the Nortel CallPilot
Image Menu.
Result: The following message appears:
Enter Y to update the BIOS [Y,N]
Enter Y to confirm.
Result: The system displays the BIOS update progress and the
following message appears:
Update is now complete...
PLEASE POWER DOWN physically in order for the settings
to take effect!
Power off your server by pressing the power button on the server
faceplate, and then power on the server by pressing the power
button again.
Result: The system reboots and the Startup Menu appears.
Enter 3 to run Utilities (BIOS, Firmware, etc...) from the Startup
Menu. If the Startup Menu is not displayed, see
Nortel CallPilot Image Menu" (page
Enter 2 to run the 600r server FRU/SDR firmware update from the
Nortel CallPilot Image Menu.
Result: The following prompt appears: Enter Y to update the
FRU,SDR [Y,N]
Enter Y to confirm.
Result: The system displays the FRU/SDR update progress and
the following message appears.
Update is now complete...
PLEASE POWER DOWN physically in order for the settings
to take effect!
Power off your server by pressing the power button on the server
faceplate, then power on the server by pressing the power button
again.
Nortel CallPilot
600r Server Maintenance and Diagnostics
NN44200-703 01.04 Standard
5.0 25 April 2007
Configuring the 600r BIOS and firmware 99
—End—
98).
"To display the