Nortel CallPilot User Manual page 34

34 Chapter 4 Using Windows online diagnostic tools
The following flags are available for the ipconfig command.
Table 8
ipconfig command extensions
Flag
/?
/all
/release
/renew
To run the ipconfig command from Windows
Step
1
2
3
4
The ping command
The ping command sends an echo request to a specified host. Use this
command to verify network connectivity to the remote device.
Ping command syntax
The ping command uses the following syntax:
ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL]
Copyright © 2007, Nortel Networks
.
Description
Displays Help information.
Displays full configuration information.
Releases the IP address for the specified adapter.
Renews the IP address for the specified adapter.
Action
Click Start → Programs → Accessories → Command Prompt.
Result: The Command Prompt window appears.
At the Command prompt, type ipconfig <parameters>.
Example: ipconfig /all
Press Enter.
Result: The system runs the ipconfig utility.
Type Exit to exit the Command Prompt window and return to
Windows.
[-v TOS] [-r count] [-s count]
[[-j host-list] | [-k host-list]]
Nortel CallPilot
600r Server Maintenance and Diagnostics
NN44200-703 01.04 Standard
5.0 25 April 2007
—End—