Chapter 7 Replacing Basic Chassis Components; Removing And Replacing The Front Bezel; Nortel Callpilot; 600R Server Maintenance And Diagnostics - Nortel CallPilot User Manual

Chapter 7
Replacing basic chassis components
In this chapter
"Removing and replacing the front bezel" (page 75)
"Removing and replacing the server cover" (page 77)
"Removing and replacing the processor air duct" (page 78)
"Replacing the power supply" (page 80)
"Replacing a hard drive" (page 82)
"Replacing the front fan assembly" (page 84)
"Replacing the MPB96 card" (page 86)
"Replacing the DVD-ROM/CDRW drive" (page 88)
"Replacing memory DIMMs" (page 91)
"Replacing the software feature key" (page 92)

Removing and replacing the front bezel

Remove the front bezel to install, service, or hot swap the hard drive and
the DVD-ROM drive.
Copyright © 2007, Nortel Networks
.
Note: Because the 600r has a single hard drive, you do not have the
ability to hot swap drives. If you remove the single hot swap drive live, the
server does not function. You must swap disk drives with the power off.

Nortel CallPilot

600r Server Maintenance and Diagnostics

NN44200-703 01.04 Standard

5.0 25 April 2007
75