Viewing Component States - Nortel CallPilot User Manual

Maintenance activities for each component
The following table identifies the maintenance activities you can perform for
each component listed in the component tree.
Table 16
Maintenance activities
Component
Media Bus
MPB96
board
Time switch
DSPs (em
bedded on
MPB boards)
Multimedia
channels
Call channel
s
DS30X link

Viewing component states

View a component state to determine the general condition of the
component, including whether the component is disabled or off duty. The
component state is shown in the Maintenance section of the Maintenance
screen.
Component states
You can determine the state of a component by looking at the State box in
the Maintenance section of the GUI tool.
State
Active
Disabled
Idle
InTest
Copyright © 2007, Nortel Networks
.
Start,
stop?
Yes
Yes
No
Yes
Yes
Yes
Yes
Note: The MGate card and DS30X cable are replaceable. If you are
having problems with the DS30X link, determine if either one or both of
these items are causing the problem and need to be replaced.
Nortel CallPilot
600r Server Maintenance and Diagnostics
NN44200-703 01.04 Standard
5.0 25 April 2007
Courtesy Diagnostics
available?
stop?
No No
No Yes
No No
No Yes
Yes Yes
Yes No
No No
Description
The component is working and currently involved in
processing a call.
The diagnostic failed.
The component is working but not currently involved
in processing a call.
A diagnostic is running on the resource or device.
Viewing component states 51
Replaceable?
No
Yes
No
embedded: No
No
No
No