Nortel CallPilot User Manual page 39

Parameter
-c
-n
-R
-r
-S
-s
interval
To run the nbtstat command from Windows
Step
1
2
3
4
The netstat command
The netstat command displays current TCP/IP network connections and
protocol statistics.
Copyright © 2007, Nortel Networks
.
Description
Lists the contents of the NetBIOS name cache giving
the IP address of each name.
Lists local NetBIOS names. Registered indicates that
the name is registered by broadcast (Bnode) or WINS
(other node types).
Reloads the LMHOSTS file after purging all names
from the NetBIOS name cache.
Lists name resolution statistics for Windows networking
name resolution. On a Windows computer configured
to use WINS, this option returns the number of names
resolved and registered through broadcast or through
WINS.
Displays both client and server sessions, listing the
remote hosts by IP address only.
Displays both client and server sessions and attempts
to convert the remote host IP address to a name using
the HOSTS file.
Displays selected statistics, pausing interval seconds
between each display. Press Ctrl+C to stop displaying
statistics. Without this parameter, nbtstat prints the
current configuration information once.
Action
Click Start → Programs → Accessories → Command Prompt.
Result: The Command Prompt window appears.
At the Command prompt, type nbtstat with the required
parameters.
Press Enter.
Result: The system runs the nbtstat utility.
Type Exit to exit the Command Prompt window and return to
Windows.
Nortel CallPilot
600r Server Maintenance and Diagnostics
NN44200-703 01.04 Standard
5.0 25 April 2007
Using TCP/IP diagnostic tools 39
—End—