Nortel CallPilot User Manual page 41

The chkdsk utility checks for errors at the Windows file system level.
CallPilot receives errors at both the Windows and CallPilot file system
levels. The chkdsk utility does not detect CallPilot file system level errors.
Chkdsk utility syntax
The chkdsk utility uses the following syntax:
chkdsk [drive:][path]filename] [/F] [/V] [/R]
Chksdsk utility parameters
Table 14
Chksdsk utility parameters
Parameter
drive:
filename
/F
/V
/R
To run the chkdsk utility from Windows
Step
1
2
3
4
Copyright © 2007, Nortel Networks
.
Note: A version of this utility, called autocheck, automatically runs
during Windows startup. Output from this utility appears on the blue
startup screen.
Action
Click Start → Programs → Accessories → Command Prompt.
Result: The Command Prompt window appears.
At the Command prompt, type chkdsk <drive letter:> (for
example, chkdsk c:).
Press Enter.
Result: The system runs the chkdsk utility.
Type Exit to exit the Command Prompt window and return to
Windows.
Nortel CallPilot
600r Server Maintenance and Diagnostics
NN44200-703 01.04 Standard
5.0 25 April 2007
Using the chkdsk utility 41
Description
Drive letter of the drive that you want to check.
Names of files to check for fragmentation.
Optional parameter to fix errors on the disk.
Optional parameter to display the full
pathname of every file on the disk.
Optional parameter to locate bad sectors and
to recover readable information.
—End—