Nortel Call Center Set Up And Operation Manual page 23

12 Choose System in the navigation tree.
The Logoff menu is enabled.
13 On the Logoff menu, click Reboot.
A message appears that asks you to confirm your request to reboot.
14 Click the Yes button to reboot.
To enable a software authorization code for CallPilot 100/150
1 Start CallPilot Manager.
2 Click the Configuration heading.
3 Click the Installed Options link.
The Installed Options page appears.
4 In the Keycode boxes type the software authorization code for the option you want to install.
5
Click the Add button.
The option you installed appears in the Installed Options list.
Chapter 2 About setting up Call Center
Nortel Call Center Set Up and Operation Guide
23