Configured Parameters - Nortel 2350 Installation And Basic Configuration Manual

Configured Parameters

The following values are configured:
• Administrative access:
●
Enable password configaccess
●
Administrative username mxradmin with password letmein
●
SSH for CLI access through the network
●
Telnet is left disabled.
• IP parameters:
●
2350 system IP address 10.10.20.15
●
Default route to 10.10.20.1 (with 1 hop)
●
DNS server 192.168.4.69 and default DNS domain name example.com
• Time and date parameters:
●
Time and date set locally (using the onboard clock instead of an NTP server)
●
Timezone is Pacific Standard Time (PST).
●
Daylight Savings Time (DST) is enabled.
• Security certificates:
●
Certificates issued by a Certificate Authority (CA) are installed for administrative access,
for 802.1X (EAP) network user access, and for WebAAA user access.
●
The certificates are installed from PKCS #12 object files supplied by the CA.
• Wireless access:
●
Country code US (United States)
●
2330 directly connected to 2350 port 2, with PoE enabled. An additional 2330 is added as
a Distributed AP.
●
Encrypted SSID branch1_wlan, in service-profile branch1_srvcprof
●
Radio profile branch1_radprof containing the AP radios, and mapped to service profile
branch1_srvcprof
●
Network user group branch1_users, which assigns users to VLAN branch1_vlan. The
user group contains users alice with password alicepass and bob with password bobpass.
●
Authentication rule to allow users with wireless clients that support 802.1X to access the
SSID branch1_wlan
●
2350 added to local user VLAN branch1_vlan
WLAN—Security Switch 2300 Series Installation and Basic Configuration Guide
Configuring a 2350 Switch for a Branch Office 145