Troubleshooting - Agilent Technologies E7473A Getting Started Manual

Receiver Battery Use and Care

Troubleshooting

Troubleshooting
If the battery pack does not work, follow these steps to determine the cause
and resolve the problem:
1. Make sure the receiver works with the DC power supply.
2. If the receiver operates on DC power from the power supply, check all of
your connections. Is the battery connector firmly in place? Is the power
switch set to ON? The green LED on the receiver should be continuously
on if there is a DC power supply.
3. Make sure that the battery pack is taking a charge from the charger.
Follow the recharging procedure. Usually batteries near the end of their
life will still take a partial charge. If there is no charge at all, you may
need to replace the charger or the battery pack:
Receiver battery kit, part number 86154-60005
Receiver battery 86154-60051
Receiver battery charger 86154-60019
Receiver battery power cord for non-US option (localization
same as option 030)
Agilent Wireless Solutions 77