Agilent Technologies E7473A Getting Started Manual page 26

Loading, Connecting, and Using the Backpack
Connecting the USB Serial Converter (86154A, option 36)
To Connect the USB Serial Converter for Use with a Laptop or a
Non-Agilent-Provided Pen Tablet
This procedure is for customers wishing to use the device on laptop systems in
a drive test environment, or indoor customers installing on their own
computing device.
1. Plug in the EdgePort/4 to the USB port. The device is recognized by
Windows 98 or Windows NT as new hardware.
2. Insert the Inside Out Network's EdgePort/4 driver diskette in the device's
floppy drive.
(For the Fujitsu Stylistic 2300 pen tablet computer, the floppy drive is
connected via a connector exposed by removing the battery. This must be
done with external power connected.)
3. Follow the directions in the New Hardware wizard to select the floppy
drive as the source for the drivers.
The drivers load and are configured automatically. The converter is now ready
to use.
28 Agilent Wireless Solutions