Agilent Technologies E7473A Getting Started Manual page 33

Loading, Connecting, and Using the Backpack
Configuring a Receiver and Phone System
7. Connect the phone cable(s) to the phone(s) and place them in the phone
pouch, as shown in
8. Connect the phone pouch to your belt or to the backpack waist belt.
9. Switch on the battery(ies), and close up the backpack.
10. Put on the backpack (see
for details), pick up the pen tablet in the case, and connect the USB 4-port
converter cable to the USB port of the pen tablet PC (or connect the RS-
232 null modem cable to the pen tablet serial port).
11. Turn on the power to the pen tablet and start the Agilent Technologies
application software. Find instructions for running the software in the
online help by pressing
Agilent Wireless Solutions
"Arranging receivers and phones" on page
"Suiting Up to Take Measurements" on page 36
.
F1
14.
35