NOTE
Figure 1-10 Connecting receivers and phones via the USB serial converter
Loading, Connecting, and Using the Backpack
Configuring a Receiver and Phone System
The battery should be fully charged and ready for prolonged testing.
5. Connect the RF antenna cable to the RF input of the Agilent digital
receiver. (See
Figure 1-10
6. If you are using a USB serial converter, secure it in place, connect the
Agilent digital receiver using the RS-232 null modem cable, and connect
the USB cable to the hub. (Or, if you are connecting directly to COM1,
connect the Agilent digital receiver to the RS-232 null modem cable.)
34
for a cabling illustration.)
Agilent Wireless Solutions