Solving Problems and Updating Your System
Updating the Firmware
Replacement Firmware Security Key
If you have misplaced your firmware write enable key, you can order a new
one (order from your Agilent Technologies representative, E6450-60007), or
you can substitute a piece of wire that shorts pins 8 to 10 on the RX LOOP
OUT connector (see
Figure
5-2). Remember to follow on screen instructions,
and remove the wire when you are prompted by the software.
Figure 5-2 Short These Pins to Update the Firmware
If you are set up to access the web, go to the following web site and follow the
links to your particular system:
http://agilent.com/find/networks
Once you have found your system, click on the
link for information on
Support
software updates.
Agilent Wireless Solutions
91