Change The Ip Address From The Web Interface, As Needed - Digi Connect SP User Manual

Configuration pages
The choices under Configuration in the menu display pages for configuring settings for various features, such as
network settings and serial port settings. Some of the configuration settings are organized on sets of linked screens.
For example, the Network Configuration screen initially displays the IP Settings, and provides links to Network
Services Settings, Advanced Settings, and other network settings appropriate to the Digi device.
Applications pages
Depending on the Digi device, there may be an Applications menu item for configuring various applications available
for use in the device.
•
Python: For loading and running custom programs authored in the Python programming language onto Connect
and ConnectPort devices that support Python.
•
Ekahau Client: For Digi Connect wireless devices, configures Ekahau Client™ device-location software. See
page 71.
•
RealPort: Configures RealPort settings. See
•
Industrial Automation: Configures the Digi device for use in industrial automation applications.
Apply and save changes
The web interface runs locally on the device, which means that the interface always maintains and displays the
settings in the Digi device. On each screen, use the Apply button to save any changes to the configuration settings to
the Digi device.
Cancel changes
To cancel changes to configuration settings, click the Refresh or Reload button on the web browser. This causes the
browser to reload the page. Any changes made since the last time the Apply button was clicked are reset to their
original values.
Restore the Digi device to factory defaults
You can reset device configuration to the factory defaults as needed during the configuration process. See
device configuration to factory defaults
Online help
Online help is available for all screens of the web interface, and for common configuration and administration tasks.
There is also tutorial available on the Home page.

Change the IP address from the web interface, as needed

Normally, IP addresses are assigned to Digi devices through DHCP.
This procedure assumes that the Digi device already has an IP address and you simply want to change it.
1. Open a web browser and type the Digi device's current IP address in the URL address bar.
2. If you enabled security on the Digi device, a login prompt appears. Type the user name and password for the
device. The default user name is root and the default password is dbps. If these defaults do not work, contact the
system administrator who set up the device.
3. Click Network to access the Network Configuration page.
Digi Connect Family and ConnectPort TS Family User Guide
RealPort configuration
on page 91.
on page 70 for more information.
Restore a
31