Digi Connect SP User Manual page 114

Color and Light
LED/button
Ethernet Switch Solid green
LEDs
Blinking green
Off
Serial LED Solid green
Blinking green
Off
Find Me/Locator Blinking amber
LED
Off
Power Green
Off
Digi Connect Family and ConnectPort TS Family User Guide
Pattern
Ethernet Switch connection is up but there is no activity on the line.
Ethernet activity is on the Ethernet Switch connection
Ethernet Switch connection is not in use.
Serial connection is up but no traffic is on the line.
Serial connection is up and traffic is on the serial port.
Serial connection is not in use
Use the LED as an aid in finding a specific device among a group of devices.
You can turn LED on or off from the Digi device's command line and web
interfaces.
From the command line, issue the findme blink={on|off} command.
From the web interface, go to Administration > Activate Find Me LED. Once
the LED is enabled, the menu item changes to Stop Find Me LED which you
can use to turn off the LED.
Find Me LED is deactivated.
Power is on.
Power is off.
Description
114