Digi Connect SP User Manual page 66

Take care in changing access settings. If you are signed in as the administrative user and disable web interface, you
will not be able to log in to the Digi device on your next attempt, and there is no way to raise your user permissions to
enable the web interface again. You must reset the device to factory defaults to enable the web interface access.
To set access settings:
1. On the Main menu, click Users.
2. On the Users Configuration page's list of users, click the user.
3. On the User Access page, enable or disable the device interface access as desired:
Allow command line access: Enables or disables access to the command line.

Allow web interface access: Enables or disables access to the web interface.

4. Click Apply. The changes take effect immediately. No logout/login is necessary.
User permissions settings
Use the User Permissions page to define whether and how users can use services and configuration settings for the
Digi device. For example, you can disable a user's access to certain parts of the web interface, or allow them to
display settings only but not change them.
The list of services and the user permissions available for them vary by Digi device and the features supported in the
product.There are several groups of services, such as Network Configuration, Serial Configuration, System
Configuration, Command Line Applications, and System Administration, with user permissions for various features.
For example here are the Network Configuration and Serial Configuration user permissions for Digi Connect ME:
Digi Connect Family and ConnectPort TS Family User Guide 66