Option 2: Direct Tcp/Ip Communications - Digi Connect ME Quick Start Manual

Option 2: Direct TCP/IP Communications

1. Visit the NCD website,
Visit any of the Ethernet product pages

Scroll Down to the "Resources" section

Select "Network Drivers," this will redirect you to

Or
Go directly to http://www.digi.com/support/productdetail?pid=2466&osvid=0&type=drivers

2. Scroll down to "Operating System Specific Drivers"
Click "Diagnostics, Utilities, and MIBs" tab

Choose your operating system

Double-click "Device Discovery Utility for Windows-Installable Version" to download utility

Or
Go directly to http://ftp1.digi.com/support/utilities/40002265_g.exe

3. Your device will appear in the list of devices
Double click on the device, and you will be redirected to the device's embedded webpage

4. Login
Username: root

Password: dbps

5. Click Serial Ports on left menu
Select "TCP Socket Radio" button

The page will refresh

6. Select "Port Link"
Select "Basic Serial Port Setting" at the bottom of the page

Change Baud Rate from 9600 to 115200

7. Select "Apply"
8. You are now ready to test and use your device!
This manual will guide you through the setup and use of all Reactor Series relay controllers. Following this manual in the sequence outlined is absolutely essential to proper understanding and use of
Reactor Series Controllers. Please review the entire manual BEFORE contacting NCD technical support.
Connect ME Setup
www.controlanything.com
www.digi.com
NCD technical support staff will direct your questions to this manual when applicable.