Digi Connect SP User Manual page 109
Hide thumbs
Also See for Connect SP:
- Hardware reference manual (42 pages) ,
- Manual (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Antenna
Connector
(SMA)
LED/button
Wi-Fi Link Status
LED
Wi-Fi Activity
Status LED
Power LED
Digi Connect ME
The Digi Connect ME module has two LEDs that are located near the upper corners of the Ethernet port (see the
following figure).
Note
The LEDs are the same for a module with or without a JTAG connector.
Digi Connect Family and ConnectPort TS Family User Guide
Digi Connect Wi-SP - Back
Wi-Fi
Link
LED
Color and Light
Pattern
Solid green
Unit is associated with an access point.
Green, blinking
Unit is in ad hoc mode.
slowly
Green, blinking
Unit is scanning for a network
quickly
Solid yellow
Bad initialization
Off
The Wi-Fi link is idle.
Blinking yellow
Traffic is on the Wi-Fi link.
Red (labeled PWR)
This LED is software-programmable. The default is that this LED
indicates power (and is therefore always on).
Power
Connector
Power
Wi-Fi
LED
Activity
LED
Description
109
Advertisement
Table of Contents
