Digi Connect SP User Manual page 85

ICMP statistics
Field
Messages Received Number of messages received.
Bad Messages
Received
Destination
Unreachable
Messages Received
WiFi LAN statistics
The WiFi LAN Statistics section displays detailed wireless statistics that may aid in troubleshooting network
communication problems in wireless Digi devices.
Field
Status
Network Name
Network ID
Channel
Transmit Rate
Signal Strength
Device Cloud status
Use the Device Cloud status section to view the connection status for the Device Cloud service.
Diagnostics
The Diagnostics page has a ping utility to determine whether the Digi device can access remote devices over the
network. Type the hostname of the remote device to attempt to access, and click Ping.
Digi Connect Family and ConnectPort TS Family User Guide
Description
Number of received messages with errors.
Number of destination unreachable messages received. A destination
unreachable message is sent to the originator when a datagram fails to
reach its intended destination.
Description
The current status of the wireless Digi device, which may include:
•
Not Connected: not associated or connected w/ any access point, perhaps because the
wireless device has not fully initialized, is out of range, or the wireless interface is
disconnected because the Ethernet interface is enabled.
•
Searching for Network: searching for a wireless network or access point for connection.
•
Associated with Network: successfully associated with the network w/ the proper
network settings and encryption.
•
Authenticated with Network: successfully authenticated a user name and password
with the network when WPA is enabled.
•
Joined Ad Hoc Network: successfully connected to and joined an ad-hoc network.
•
Started Ad Hoc Network: successfully created, started, and joined an ad-hoc network.
The name of the wireless network to which the Digi device is connected.
The ID of the wireless network to which the Digi device is connected and communicating.
The frequency channel that the wireless LAN radio uses for the Digi device.
The current transmission rate for the wireless LAN radio.
The current receive signal strength as reported by the wireless LAN radio. Ranges are from 0
to 100.
85