Digi Connect SP User Manual page 78

line-based interface to Digi devices. Use this utility to upload firmware, files, configuration settings and factory
defaults to a Digi device. You can run it from the command line on a computer that uses the Microsoft Windows
operating system.
You can download the Digi Connect Programmer utility from the Digi website.
The following table list some of the available commands. For details and command descriptions, see the Digi Device
Customization and Integration Guide.
Command
connectprog /help
connectprog /discover
connectprog set /mac=<mac address> /ip=<ip address>
connectprog /info /destip=<ip address> /username=root /
password=dbps
connectprog /backup /destip=<ip address> /username=root
/password=dbps
connectprog /upload /destip=<ip address> /
config=<directory path>\<file name>.txt /username=root /
password=dbps
The following example displays the results for the discover command:
connectprog /discover
Digi Connect Programmer
Version 1.6.25.0
Copyright 2003-2009 Digi International Inc.
Searching for devices. Please wait...
IP Address
-----------------+-------------------+------------------------------
192.168.1.4
-----------------+-------------------+------------------------------
1 device found.
Digi Connect Family and ConnectPort TS Family User Guide
| MAC Address
00:40:9D:12:34:56
Description
Displays the complete list of available command
options.
Discovers devices on the local LAN. This is
equivalent to using the Digi Device Discovery utility.
Sets the IP address for the device at the identified
MAC address.
Displays device information for the specific device.
Backs up the complete device configuration to
config.rci in the local directory.
Uploads the configuration file to the device.
| Model
ConnectPort TS 16
78