Digi Connect SP User Manual page 70

deleting them as needed, and configure Python programs to execute when the Digi device boots, also known as auto-
start programs.
Python files
The Python Files page is for uploading and managing Python programs on a Digi device.
•
Upload Files: Click Browse to select a file to upload to and click Upload.
•
Manage Files: Select any files to remove from the Digi device and click Delete.
Auto-start settings
The Auto-start Settings page configures Python programs to execute when the Digi device boots. You an configure
up to four auto-start programs.
•
Enable: When checked, the program specified in the Auto-start command line field will be run when the device
boots.
•
Auto-start command line: Specify the Python program filename to be executed and any arguments to pass to
the program. The syntax is:
filename [arg1 arg2...]
Manually execute uploaded Python programs
To manually execute an uploaded Python program on a Digi device, access the command line of the device and type
the following command:
filename
python
View and manage executing Python programs
To view Python threads running on the Digi device, access the command line and type the who command.
RealPort configuration
RealPort software must be installed and configured on each computer that uses the RealPort ports on the Digi device.
This RealPort software is available for downloading from the Digi Support site. For products that ship with a Software
and Documentation CD, the RealPort software is on the CD.
Install RealPort software
From the Digi Support site:
1. From a browser, go to www.digi.com.
2. Click the Support link and select Drivers.
3. Under Select Your Product for Support, select your Digi device from the product list and click Submit.
4. Under Active Products, select your Digi device from the product list.
5. Under OS Specific Diagnostics, Utilities and MIBs, select the operating system for your computer from the list.
6. Under RealPort for Windows, click the zip file.
7. Unzip the zip file.
8. Run the RealPort setup wizard.
From the Software and Documentation CD:
1. On the main page of the Software and Documentation CD, click Software - install optional software.
Digi Connect Family and ConnectPort TS Family User Guide
arg1 arg2
[ ...]
70