Digi Connect SP User Manual page 116

Color and Light
LED/button
Power LED Solid Green
Fuse Good LED Solid Green
Diag LED Amber
1-1-1 blinking
amber
1-5-1 blinking
amber
Other blinking
amber
Solid amber
C1 & C2 LEDs Green
Reset button N/A
Serial TX Yellow
Serial RX Green
Ethernet Link LED Solid green
Ethernet Activity Blinking yellow
LED
ConnectPort TS 8 and ConnectPort TS 8 MEI
Digi Connect Family and ConnectPort TS Family User Guide
Pattern
Power is applied.
Power is applied and the fuse is good.
If this LED is not illuminated when power is applied, the fuse is blown and
needs to be replaced.
Blinks during product initialization and factory reset, using the light patterns
below. This LED should never blink during normal operation. If it blinks
constantly, contact Digi Technical Support.
Firmware is initializing.
Device configuration has been restored to its factory defaults.
Contact Digi Technical Support.
Device is powered on and ready for operation.
These LEDs are provided for use by custom Linux applications running on the
unit.
Performs equivalent of a power-cycle.
On when data is being transmitted out of a serial port.
On when data is being received on a serial port.
Ethernet link is up. Will light solid green when an active LAN connection is
plugged into the Ethernet port.
Blinks when active traffic is on the LAN connection.
Description
116