Digi Connect SP User Manual page 82
Hide thumbs
Also See for Connect SP:
- Hardware reference manual (42 pages) ,
- Manual (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Signals
The Signals pane shows the state of serial port signals. Signals are green when asserted (on) and gray when not
asserted (off). The following table defines signals:
Signal
RTS
CTS
DTR
DSR
DCD
OFC
IFC
Serial statistics
The Serial Statistics pane displays data counters and error tracking that will help determine the quality of data that is
being sent or received. If the error counters are accumulating, there may be a problem in the Digi device.
Digi Connect Family and ConnectPort TS Family User Guide
Description
Request To Send.
Clear To Send.
Data Terminal Ready.
Data Set Ready.
Data Carrier Detected.
Output Flow Control. Indicates that flow control is enabled on the remote side of the serial-
port connection, and that the Digi device should stop sending data.
Input Flow Control. Indicates that the Digi device is operating as if flow control is enabled for
incoming data sent from the remote side of the serial-port connection. This signal is more of
an indication that flow control is intended or expected rather than true state information. If
the remote side has a flow-control mechanism enabled, the Digi device will use it.
82
Advertisement
Table of Contents
