Digi Connect EM and Digi Connect Wi-EM
Digi Connect EM and Digi Connect Wi-EM modules provide two hardware options for LEDs, with or without on board
LED array. The integration kit provides predefined LED behavior. With the development kit, your implementation
determines some LED behavior. See the following table for more information.
.
Pin
LED
Header
EM
Top left
1 (+)
(green)
3(-)
Top right
5 (+)
(green)
7 (-)
Digi Connect Family and ConnectPort TS Family User Guide
LED Behaviors
Integration Kit
Digi Connect EM
Serial port activity:
Off - the serial channel is idle.
Blinking - serial data is transmitted or received.
Network link status:
Off - no link has been detected.
On - a link has been detected.
Integration Kit
Digi Connect Wi-EM
Network link status:
On - unit is associated with an
access point.
Blinking slowly - unit is in ad hoc
mode.
Blinking quickly - unit is scanning
for a network.
Development
Kit
This LED is
software
programmable
Same as
Integration Kit
(Network link
status)
111