Siemens VDO modulcockpit II Product Manual page 6

Technical Product Manual
VDO modulcockpit II
1. General Informations
1.2 Final Assembly Instructions
Do not use components other than the genuine VDO ones listed in the product
manual!
Before assembly, an equalization of potential between the assembly worker and the
module (single instrument module, circuit board) must be effected in order to prevent
a destruction by a discharge of static electricity.
After Workshop assembly, the instruments concerned will have to be marked as
follows: Part No., Workshop No., and Date.
Complete VDO modulcockpit II instruments for which production code numbers have
been assigned must never be changed in any whatsoever (modified, rebuilt etc.)!
SiemensVDO Automotive AG does not assume any liability or warranty for work which
does not comply with above.